The XL Performance nozzles increase abrasive particle velocity, resulting in improved production rates and efficiencies. The XL Performance nozzles will utilize the same air (CFM) requirements as our standard long venturi products for the same given bore size, resulting in lower compressed air operating costs per square foot / meter. These products are produced in our popular lightweight BP200 SiAlON material, helping minimize nozzle weight and overall operator fatigue.

The Square ShooterTM blast nozzle production rate is faster than the conventional long venturi high production nozzles. The Square ShooterTM nozzle requires only a 10% to 20% overlap as compared to a long venturi nozzle which requires a 50% overlap. This increase results in abrasive savings due to less abrasive consumption as well as productivity savings.

Excellent for medium cleaning and stripping applications where an even dispersion of the abrasive throughout the wide uniform blast pattern is required. Acceptable for use with most types of abrasives. Designed to be used with 25mm (1") I.D. blast hose. Dimensions below are shown in millimeters and (inches).

The double venturi offers a 35% larger blast pattern than a standard long venturi with only a slight loss in abrasive velocity. Designed to be used on jobs where medium cutting action is required with a more even dispersion of abrasive throughout the larger blast pattern. Excellent for plastic or agricultural abrasives.

Offers a 35% larger blast pattern than standard long venturi with only a slight loss in abrasive velocity. Designed for jobs where medium cutting action is required and a more even dispersion of abrasive throughout the larger blast pattern. These nozzles are produced in our popular lightweight BP200 SiAlON material, helping minimize nozzle weight and overall operator fatigue.

• Aluminum jacket.
• Slip-on assembly.

• Steel jacket.
• Designed for use with 25mm (1") I.D. hose.

For white metal or near white metal blast use at 125 to 150 psi nozzle pressure. For commercial or sweep blast use at 90 to 100 psi nozzle pressure. The BAZOOKATM yields a 60% larger blast pattern with minimal operator fatigue.

For white metal or near white metal blast use at 125 to 150 psi nozzle pressure. For commercial or sweep blast use at 90 to 100 psi nozzle pressure. The BAZOOKATM yields a 60% larger blast pattern. These nozzles are produced in our popular lightweight BP200 SiAlON material, helping minimize nozzle weight and overall operator fatigue.